Premiere Pro · Exporting and delivery
How to fix washed-out colors after export in Premiere Pro
The short answer
First find out whether the file is different or only looks different where you play it. Import the export back into Premiere and compare it with the timeline. If they match but the file looks washed out in QuickTime Player or another Mac app, that is the gamma shift Adobe documents: Premiere displays video with the 2.4 broadcast gamma curve, while most macOS apps use 1.96 and Windows uses 2.2, so the same file looks lighter outside Premiere. Adobe says there is no simple fix; its Viewer Gamma setting lets you see the video in Premiere the way your audience will, and it does not change the export. If the re-import doesn't match the timeline, check the sequence's Output Color Space, the Export Color Space and the Effects section of Export mode. In Premiere 27.0, Output Color Space and Display Color Management are in the new Color Management panel, which replaced the retired Lumetri Color panel; Export Color Space and the Effects section are in Export mode.

8 steps
In Premiere Pro
- 01Compare the file inside Premiere
- 02If it only looks washed out on a Mac, set Viewer Gamma
- 03Turn on Display Color Management
- 04Check the sequence's Output Color Space
- 05Check the Export Color Space
- 06Look at the Effects section in Export mode
- 07Judge the grade in Composite mode
- 08Update Premiere if a LUT drops out in Media Encoder
01
Compare the file inside Premiere
Import the exported file and open it in the Source Monitor, with the sequence in the Program Monitor. By default the Source Monitor is set to Gang to Active Sequence Color Management (wrench menu > Monitor Color Management), so it uses the same color management as the sequence on screen. If the two match but the file looks washed out in QuickTime Player or another app, the file is fine and the difference is gamma: go to step 2. If they don't match, skip step 2 and check the settings in the steps after it.
02
If it only looks washed out on a Mac, set Viewer Gamma
Adobe calls this QuickTime gamma shift. Premiere displays video with the 2.4 broadcast gamma curve; Windows uses 2.2 and macOS 1.96, so most other Mac apps show a Premiere export lighter than the timeline. Adobe says it isn't a bug and there is no simple fix. Viewer Gamma changes how Premiere displays video, not how it exports, so you can grade while seeing what your audience sees. Adobe's advice: 2.2 (Web) for web content, 2.4 (Broadcast) for broadcast, and 1.96 (QuickTime) only when viewers watch on a Mac desktop. In Premiere 26.x and earlier, Viewer Gamma is in Lumetri Color > Settings > Project; Adobe's 27.0 pages don't say where it is now that the Lumetri Color panel is retired.
03
Turn on Display Color Management
Open the Color Management panel and, in the Preferences section, make sure Display Color Management is on. Adobe lists it as a preference that shows colors more accurately on supported screens. For an SDR program, leave Extended Dynamic Range Monitoring off; turn it on only for HDR work.
04
Check the sequence's Output Color Space
In the Sequence section of the Color Management panel, leave Output Color Space at Direct 709 for SDR that plays on almost anything. Rec. 2100 HLG and Rec. 2100 PQ are HDR outputs. Premiere picks the color setup from the first clip you add, so iPhone HLG media can switch a sequence to Direct HLG (HDR); for Rec. 709 delivery Adobe says to use Direct Rec. 709 (SDR) or Wide Gamut (Tone Mapped). Changing the setup after you grade can change how clips look, so check the grade again afterwards.
05
Check the Export Color Space
In Export mode (File > Export > Media), open Video. Export Color Space defaults to Rec. 709 for most presets; other choices need H.264 set to High 10, HEVC set to Main 10, or Render at Maximum Depth for ProRes. If the format or bit depth can't carry the sequence's Output Color Space, Premiere may assign another Export Color Space and shows a warning. Change the format or raise the bit depth to keep the Output Color Space.
06
Look at the Effects section in Export mode
Export mode can add effects to the exported file only: Lumetri color adjustments, HDR to SDR conversion with a Tone Mapping method, images and text overlays. Preview them on the Export screen. To leave them all out, turn off the switch on the Effects header.
07
Judge the grade in Composite mode
In Color Mode, Clip mode turns Solo mode on, and Solo suspends compositing effects and ignores clips on the tracks above the selected one. Adobe describes it as a way to monitor one clip cleanly. Select Solo again to go back to Composite mode before you compare the timeline with the export. In the Color Controls panel, also check that no operation you want is toggled off.
08
Update Premiere if a LUT drops out in Media Encoder
Adobe's release notes list a fix in Premiere 26.3 (June 2026): on Windows, LUT color looks applied in Premiere were not carried through when a project was sent to Media Encoder for export. On an older version, update. Media Encoder has its own Display Color Management and Viewer Gamma preferences; Adobe describes Viewer Gamma as a setting for media preview.
Good to know
Before you start
- Note 1
- Adobe's caveat on Viewer Gamma, in a note headed "In Premiere v25.2 and earlier": Viewer Gamma "is designed to work with standard dynamic range (SDR) workflows" and "requires Lumetri Color > Settings > Sequence > Color Setup is set to Direct Rec. 709 (SDR) or Disable Color Management." For log and raw media it works with a LUT-based workflow but not with automatic log and raw color management turned on. Adobe says a future version will update it to work with other color management workflows.
- Note 2
- Adobe says Viewer Gamma replaces the gamma compensation LUT that some editors applied at export to deal with QuickTime gamma shift. For web content it also suggests raising Contrast slightly to allow for varied viewing conditions, and telling clients that color can look different from device to device.
- Note 3
- Banding in smooth gradients is a different problem. Render at Maximum Depth in the Video settings renders effects at the highest bit depth the format supports, usually 32-bit float, which Adobe says can reduce banding. It can make encoding slower, and systems using GPU acceleration always render at the highest bit depth.
- Note 4
- Wide Gamut (Tone Mapped) can slightly darken SDR media that was already graded. In 27.0, the Apply Inverse Tone Mapping and Gamut Compression checkbox in the Advanced settings keeps SDR graphics and media from being darkened.
- Note 5
- Existing Lumetri Color effects open in 27.0 with every adjustment intact. You edit them in the Properties panel or the Effect Controls panel. For new projects Adobe recommends Color Mode, because Lumetri may clip out-of-range color values.
- Note 6
- Premiere 26.x and earlier: Display Color Management was in the Preferences part of the Lumetri Color panel's Settings tab, and Color Setup and Output Color Space were in its Sequence section or on the Color tab of Sequence > Sequence Settings. Adobe's pages for these, and its Source Monitor color management page, were last updated before 27.0.
- Note 7
- Checked against Premiere 27.0, Adobe's Color Mode pages as updated on November 10, 2026, and Adobe's washed-out exports page as updated on April 2, 2026.
Eddie AI
Do it in Eddie
If the edit started in Eddie, check whether the export you opened carries the grade at all.
A grade you ask Eddie for, such as "warm it up a little", applies to that edit only. The player shows it and an MP4 render bakes it in. Premiere XML carries it as an editable correction for some edits only, and the export notes say when it is left out. The Premiere project (.prproj) never carries it, so a timeline that looks different in Premiere may be missing the grade rather than showing an export setting. If you finish in Premiere, do the color there.
Back to Premiere
Open the edit, click Export and choose Premiere. You get a Premiere project (.prproj) or the older Premiere XML. In the desktop app, Send to Premiere Pro builds the edit inside Premiere through Eddie's panel, which the app installs for you.
If you imported the footage through the desktop app, the timeline points at your original camera files, so Premiere relinks to them. If you uploaded on the web or pulled from cloud storage, it points at Eddie's proxy media; relink to those, not to the camera originals.
FAQ
Questions
- Why do my colors look washed out after export in Premiere Pro?
- Adobe puts it down to gamma curves. Premiere displays video with the 2.4 broadcast gamma curve, Windows uses 2.2 and most macOS apps use 1.96, so a Premiere export looks slightly lighter on Windows and washed out on a Mac. Re-import the export to check: if it also differs from the timeline inside Premiere, the settings Adobe documents that change the file are the sequence's Output Color Space, the Export Color Space in the Video settings and the Effects section of Export mode.
- Why doesn't my export match the timeline in Premiere Pro?
- Adobe says the Program Monitor and the export both show the picture after conversion to the sequence's Output Color Space. What can still differ is set at export only: an Export Color Space that Premiere assigned because the format or bit depth can't carry the output, or effects added in Export mode.
- Why aren't my Lumetri colors exporting in Premiere 27?
- The Lumetri Color panel is retired in 27.0, but existing Lumetri Color effects open with every adjustment intact, and you edit them in the Properties panel. If a LUT look goes missing only in jobs sent to Media Encoder on Windows, Adobe lists that as fixed in 26.3.
- Is it a QuickTime problem?
- If the re-imported file matches the timeline in Premiere, yes. Adobe calls it QuickTime gamma shift: Premiere displays video with a 2.4 gamma curve and most other macOS apps use 1.96, so the file looks washed out there. Adobe says it isn't a bug. Viewer Gamma, with a 1.96 (QuickTime) option, changes only how Premiere displays the video, not the export. If the re-import doesn't match, look at the export settings instead.
- Does Display Color Management change my export?
- Adobe lists Display Color Management as a preference for showing colors on your screen. The exported picture follows the sequence's Output Color Space and the Export Color Space.
Sources
- Adobe: Fix washed-out colors in Premiere exports (updated Apr 2, 2026)
- Adobe: Color Mode basics (updated Nov 10, 2026)
- Adobe: Changes to Lumetri Color
- Adobe: Work in Color Mode
- Adobe: Using Color Mode with Color Management
- Adobe: Color Monitor overview
- Adobe: Managing multiple color operations
- Adobe: About Color Management (updated Jan 7, 2026, before 27.0)
- Adobe: How Color Management works (updated Jan 7, 2026, before 27.0)
- Adobe: Manage source media colors in the Program Monitor (updated Aug 22, 2025, before 27.0)
- Adobe: Color preferences
- Adobe: Video encoding settings
- Adobe: Basic video settings
- Adobe: Overview of export settings
- Adobe: Create and export HDR videos for YouTube on Mac
- Adobe: Premiere desktop release notes (June 2026, version 26.3; November 2026, version 27.0)
- Adobe: Media Encoder preferences
- Adobe: Color settings (Lumetri Color panel, before 27.0)
- Adobe: Configure sequence Color Management (before 27.0)

