PRACTICAL GUIDEPremiere Pro27.0

Premiere Pro 27 System Requirements: Will It Run?

Premiere 27.0 needs an Apple silicon Mac on macOS 15, or Windows 11 24H2 with 4 GB of GPU memory. Intel Macs are off the list. What to do if blocked.

A computer monitor on a wooden desk with books and a plant, with the headline: Will Premiere 27 run on your computer?
Photo by The Maker Jess on Unsplash.

In Summary Premiere 27.0 needs an Apple silicon Mac (M1 or later) on macOS 15 Sequoia or later, or a Windows PC on Windows 11 version 24H2 or later with an AVX2 processor and at least 4 GB of GPU memory. Intel Macs are not on Adobe's 27.0 list at all. New in 27.0, Premiere will not launch on a computer without enough GPU memory, and a System Compatibility Report tells you why. If your computer falls short, install a 26.x version from Other versions in the Creative Cloud desktop app.

The short answer

Premiere Pro 27.0 runs on Apple silicon Macs with macOS 15 Sequoia or later, and on Windows 11 version 24H2 or later. It does not support Intel Macs: Adobe's 27.0 requirements list only Apple silicon, where the 26.x list still included Intel processors.

Adobe released Premiere 27.0 in November 2026. Adobe's help pages now call the app Adobe Premiere. Everything below was checked on November 21, 2026 against Adobe's Premiere technical requirements (applicable to version 27.0, updated November 10, 2026), the 26.x technical requirements and the release notes.

Will Premiere 27 run on my computer?

Find your computer in the first column. Adobe's minimums are for editing HD video; its recommended specs are for HD, 4K and higher.

Your computerPremiere 27.0What decides it
Mac with Apple silicon (M1 or later), macOS 15 Sequoia or laterRunsMinimum is M1 and 8 GB of unified memory
MacBook Neo (Apple silicon A18 Pro or later), macOS 15 or laterRunsAdobe lists the A18 Pro as a minimum processor
Mac with Apple silicon on macOS 14 Sonoma or earlierBlocked until you update macOSMinimum is macOS 15 Sequoia. Adobe's v27.0 notice says macOS 14 users need to update to macOS 15 or later before updating
Mac with an Intel processorNot supported27.0 lists Apple silicon only. Stay on 26.x
Windows 11 version 24H2 or later, Intel 6th Gen or AMD Ryzen 1000 or newer with AVX2, GPU with 4 GB or moreRunsAll minimums met
Windows 11 version 23H2 or earlierBlocked until you update WindowsMinimum is Windows 11 v24H2. Adobe's v27.0 notice says 23H2 users are blocked from installing 27.0
Windows 10Not supportedWindows 10 is not on the 27.0 list (it was not on the 26.x list either)
Windows PC with a GPU under 4 GB of memoryWill not launchNew in 27.0: Premiere does not launch below the GPU memory minimum, and a System Compatibility Report explains why
Windows PC with an NVIDIA GPU older than Maxwell (2014)Not supportedAdobe's minimum is Maxwell generation or newer
Processor without AVX2 supportNot supportedAdobe says AVX2 support is required
Windows on Arm with NVIDIA RTX Spark or Qualcomm Snapdragon X seriesRuns16 GB of shared memory minimum; on Snapdragon, Adreno GPU driver 31.0.121.1 or later

If two rows apply, the stricter one wins. A Windows 11 24H2 PC with a 2 GB graphics card still will not launch 27.0.

Full Premiere 27.0 requirements: macOS

MinimumRecommended
ProcessorApple silicon M1, or Apple silicon A18 Pro or later (MacBook Neo)Apple silicon M1 Max, M1 Ultra, M2 Pro or newer
Operating systemmacOS 15 SequoiamacOS 26 Tahoe and later
Memory8 GB of unified memory16 GB of unified memory
GPU8 GB of unified memory16 GB of unified memory
Storage8 GB of available space, plus extra free space during installation. Not on removable flash storageFast internal SSD for the app and cache, plus a high-speed drive for media
Display1920 x 10801920 x 1080 or more; DisplayHDR 1000 for HDR
Network storage1 Gigabit Ethernet (HD only)10 Gigabit Ethernet for a shared 4K workflow

Full Premiere 27.0 requirements: Windows

MinimumRecommended
ProcessorIntel 6th Gen or newer, or AMD Ryzen 1000 Series or newer, with AVX2. Windows on Arm: NVIDIA RTX Spark or Qualcomm Snapdragon X seriesIntel 11th Gen or newer with Quick Sync, or AMD Ryzen 3000 / Threadripper 3000 or newer. Windows on Arm: NVIDIA RTX Spark or Snapdragon X2 Elite
Operating systemWindows 11 v24H2Windows 11 v25H2 or later
Memory8 GB RAM (Windows on Arm: 16 GB of shared memory)16 GB for HD media, 32 GB or more for 4K and higher
GPUNVIDIA: Maxwell generation (2014) or newer with at least 4 GB of GPU memory. Intel or AMD: at least 4 GB of GPU memory. Windows on Arm: NVIDIA RTX Spark, or Qualcomm Adreno with driver 31.0.121.1 or later8 GB of GPU memory
Storage8 GB of available space, plus extra free space during installation. Not on removable flash storageFast internal SSD for the app and cache, plus a high-speed drive for media
Display1920 x 10801920 x 1080 or more; DisplayHDR 1000 for HDR
Sound cardASIO compatible or Microsoft Windows Driver ModelSame
Network storage1 Gigabit Ethernet (HD only)10 Gigabit Ethernet for a shared 4K workflow

You also need an internet connection, an Adobe ID and acceptance of the license agreement to activate Premiere.

What changed from Premiere 26

Comparing Adobe's 27.0 page with its 26.x page:

  • Intel Macs are gone. The 26.x Mac minimum was an Intel 8th Generation or newer processor with AVX2, or Apple silicon. The 27.0 Mac minimum is Apple silicon only: M1, or A18 Pro or later.
  • GPU memory is now enforced at launch. The 27.0 release notes say: "Premiere now requires a minimum amount of GPU memory. Computers that don't meet it can no longer launch Premiere, and a System Compatibility Report explains why." The Windows minimum on the requirements page is 4 GB of GPU memory, the same figure the 26.x page listed. The difference is that 27.0 stops at launch instead of letting you open the app.
  • Windows on Arm gains NVIDIA. 27.0 adds the NVIDIA RTX Spark processor and GPU next to Qualcomm Snapdragon X series. The 27.0 release notes also list native Windows on Arm support on PCs with the NVIDIA RTX Spark (N1X) chip.
  • Windows minimum is unchanged on paper. Both pages list Windows 11 v24H2 as the minimum.
  • One format is gone. 27.0 removed import support for Sony RAW and Sony 16-bit linear F65 RAW footage. If you cut those formats, that alone is a reason to keep 26.x installed.

Why Premiere won't update to 27

Work down this list:

  1. Intel Mac. 27.0 does not support it. There is no setting that changes this. Stay on 26.x.
  2. macOS 14 or earlier on Apple silicon. Update macOS to 15 Sequoia or later, then update Premiere.
  3. Windows 11 older than 24H2. Update Windows first.
  4. Premiere installs but will not open. Read the System Compatibility Report it shows. Adobe's 27.0 release notes say Premiere no longer launches on computers below its minimum GPU memory, and the report explains why. On Windows, Adobe also uses that report to flag a video driver it knows is incompatible, so update the driver from your GPU maker's website (Adobe notes Windows Update may not have the latest one).
  5. Not enough disk space. Premiere needs 8 GB plus extra free space while it installs, and it cannot be installed on removable flash storage.

Stay on Premiere 26 if you're blocked

Adobe documents how to install an older version from the Creative Cloud desktop app:

  1. Open the Creative Cloud desktop app from the Windows taskbar or the macOS menu bar.
  2. In the Apps tab, select Your apps.
  3. Select the More actions icon on the Premiere tile.
  4. Choose Other versions.
  5. Find the version you want and select Install.

Adobe says the versions offered depend on which releases it currently supports and distributes, so check the list rather than assume a specific 26.x build is there.

To keep 26.x installed when 27.0 arrives, stop Creative Cloud from removing it. Open the Creative Cloud desktop app, select the Account icon, then Preferences. In the Apps tab, turn on Auto-update, select Advanced options for Premiere, deselect Remove older versions and select Done. On a school or work account where your organization has turned off auto-updates, this option does not appear.

Projects between 26 and 27

Adobe says project files are forward and backward compatible only within a major release. Opening a 26 project in 27 creates a new project file and keeps the original. To go back, Adobe's route is to save the work as XML and import it into the older version. If a teammate is staying on 26.x, agree on the version before anyone opens a shared project in 27.0. Our answer on opening a Premiere project in an older version covers the XML steps and what drops out, and exporting an XML from Premiere covers the export itself.

If 27 runs but feels slow

Meeting the minimum gets you HD editing. For 4K, Adobe recommends 32 GB of RAM or more and 8 GB of GPU memory on Windows, or 16 GB of unified memory on a Mac. Below that, proxies are the usual fix: see how to create proxies in Premiere Pro and how to fix laggy playback.

Where Eddie fits

Eddie does not change what Premiere needs: the tables above still decide whether 27.0 installs. Eddie handles the logging and the first cut. Its Premiere extension reads clips, multicams and timelines from the bin, Eddie makes proxies so the analysis stays quick, and the sequence comes back to Premiere with the media relinked. See the Premiere Pro workflow and send an edit to Premiere Pro. For Premiere's own AI tools, see AI features in Premiere Pro 26.5.

What it will not do

  • No Intel Mac support in 27.0. Adobe lists no workaround. Use 26.x.
  • No launch below the GPU memory minimum. 27.0 stops with a System Compatibility Report; there is no override in Adobe's documentation.
  • No Sony RAW or F65 RAW import in 27.0. Adobe removed it.
  • No saving a 27 project for 26. Use XML, and expect to rebuild what it does not carry.

FAQ

Does Premiere Pro 27 work on Intel Macs?

No. Adobe's 27.0 requirements list Apple silicon only (M1, or A18 Pro or later). The 26.x requirements still include Intel 8th Generation or newer with AVX2, so Intel Mac owners can install 26.x from Other versions in Creative Cloud.

What macOS version does Premiere 27 need?

macOS 15 Sequoia or later. Adobe recommends macOS 26 Tahoe and later.

Why can't I install Premiere 27 on Windows 11?

Check three things: Windows 11 must be version 24H2 or later, the processor must support AVX2, and the GPU needs at least 4 GB of memory. If it installs but will not launch, the System Compatibility Report explains why.

Does Premiere 27 run on Windows 10?

Windows 10 is not on Adobe's 27.0 list. The minimum is Windows 11 v24H2.

How much RAM does Premiere 27 need?

8 GB on Windows and 8 GB of unified memory on Apple silicon at minimum. Adobe recommends 16 GB for HD and 32 GB or more for 4K on Windows, and 16 GB of unified memory on a Mac. Windows on Arm needs 16 GB of shared memory.

How do I go back from Premiere 27 to 26?

In the Creative Cloud desktop app, open Your apps, select More actions on Premiere, choose Other versions and install the version you want. Projects already saved in 27 need to come back through XML.

Sources