
In Summary Premiere 27.0 (November 2026) retired the Lumetri Color panel. Color grading now lives in Color Mode: select the Color tab next to Edit at the top left of the app. The Lumetri Color effect is still in the Effects panel, and Adobe says projects that use it open exactly as before, with every adjustment intact. If you don't see the Color tab, you are not running 27.0 yet.
The short answer
Adobe removed the panel, not the effect. In Premiere 27.0 the Lumetri Color panel is gone. Color Mode, a separate grading workspace, replaces it. You open it with the Color tab in the Premiere header bar, next to Edit.
Three things took over the old panel's jobs:
- Color Mode for full grading: the Color Controls panel, the Clip Grid, the Color Monitor and the Video Scopes panel.
- The Properties panel in Edit mode. It has a new Color section with basic sliders for quick fixes, and it is one of two places Adobe names for editing Lumetri Color effects now, with Effect Controls.
- The Color Management panel, which Adobe says took the panel's place for transforming log and raw media to SDR or HDR.
This guide covers Premiere on desktop 27.0. Everything below was checked on November 21, 2026 against Adobe's release notes, updated November 18, 2026, and its Color Mode help pages, updated November 10, 2026.
Open Color Mode
- In Edit mode, open the sequence you want to grade in the Timeline.
- Select the Color tab in the Premiere header bar, at the top left next to Edit.
- Color Mode opens in its default layout. Select a clip in the Clip Grid to grade it in the Color Controls panel.
The Project panel is available in Color Mode, so you can open other sequences without switching back. Adobe built Color Mode to work on sequences that use Color Management, and it recommends you check the sequence's color setup before you start grading. Changing it after you have graded can change how your clips look. Our guide to sequence color management in Premiere covers that setting.
Where each Lumetri control lives now
Adobe has no single "old control, new place" page. This table pulls the answers together from its Color Mode help pages. Where Adobe documents no direct replacement, the table says so.
| In the old Lumetri Color panel | Where it is in Premiere 27.0 |
|---|---|
| The panel itself (Window > Lumetri Color) | Retired. Use the Color tab (Color Mode), or Properties > Color in Edit mode |
| The Lumetri Color effect | Still in the Effects panel, in the Color Correction bin. Edit new and existing ones in the Properties panel or the Effect Controls panel; Adobe's pages name both |
| Input LUT and log conversion | The Color Management panel transforms log and raw media to SDR or HDR. Adobe's FAQ says transform LUTs and creative LUTs are fully supported in Color Mode, which has LUT operations |
| White balance eyedropper, Temperature, Tint | Properties > Color, under Chroma: White Balance Eyedropper, Temperature and Tint. In Color Mode: the Temperature control in Adjust (drag up and down for temperature, left and right for tint) |
| Exposure, Contrast, Blacks, Saturation | Properties > Color: Contrast, Pivot, Exposure and Black under Luminance, Saturation under Chroma. In Color Mode: the Color & Contrast controls in Adjust |
| Highlights and Shadows | Zones in Adjust. You start with a Shadows zone and a Highlights zone and can add up to three of each. A zone targets Exposure, Temperature, Balance and Saturation at that part of the image |
| The Auto button | Auto Color at the bottom left of Adjust. Right-click it for Auto Exposure or Auto White Balance on their own |
| Creative: Sharpen and Vibrance | Texture and Sharpness under Detail in Properties > Color, or the Detail module in a Style operation. Vibrance is the Variable Vibrance module in Style |
| Creative: Looks | Style operations and their Style Presets, plus modules such as Film Color. LUTs go in a LUT operation |
| Curves | Adobe documents no curves tool in Color Mode. It says exposure moves across several zones do the job of an exposure curve, saturation across zones works like a Lum vs Sat curve, and the Contrast Kit module in Style draws an S-curve |
| Color Wheels | The Balance control in Adjust, a color-wheel style control you can use globally or in one zone |
| Color Match (Clip Match) | Removed. For matching by eye, Comparison View moved from Edit mode to Color Mode. Its Side-by-Side mode is not available yet |
| HSL Secondary | Color Shift in Adjust (Sat Shift, Color Shift and Lum Shift on hue swatches), and HSL Masking, new in 27.0, for isolating a range of colors |
| Vignette | The Vignette module in a Style operation |
| Lumetri Scopes | The Video Scopes panel, with new Vectorscope, Waveform Monitor, RGB Parade and RGB Overlay scopes. Choose Show Legacy Scopes from the menu next to the panel's title to get the old Lumetri Scopes back |
One Adobe page is out of date. The Add Look-up Tables page, last updated January 7, 2026, still tells you to choose Window > Lumetri Color and use the Input LUT menu in Basic Correction. That path does not exist in 27.0.
What happens to your old Lumetri grades
Adobe's answer is that nothing changes. In its words, existing Lumetri effects "still open exactly as they did before, with every adjustment intact." Projects that used Lumetri "will import correctly and appear as before, with total color fidelity." You can keep adding Lumetri Color effects to new clips too.
Adobe does advise against mixing the two on new projects. It recommends Color Mode without Lumetri Color effects, because the Lumetri effect has a more limited range of adjustment, may clip out-of-range color values so later adjustments cannot recover them, handles color spaces less precisely and was designed mainly for SDR. Using Lumetri effects together with Color Mode can limit your options in the Color workspace.
A practical split: leave finished projects on Lumetri, and start new ones in Color Mode.
Why you don't see Color Mode
- You have 26.5.3, not 27.0. Adobe released two Premiere versions in November 2026: 27.0, with Color Mode, and 26.5.3, a bug-fix release. If you updated this month and still see the Lumetri Color panel, check which one you installed.
- You are looking in the Window menu. Color Mode is not a panel. It is a mode, like Edit and Export, and its tab sits in the header bar.
- Your computer is below 27.0's GPU minimum. Premiere 27.0 needs a minimum amount of GPU memory. Adobe says computers that don't meet it can no longer launch Premiere, and a System Compatibility Report explains why.
Where Eddie fits
Eddie does not add a Lumetri panel or anything inside Color Mode. If you already grade in Eddie and finish in Premiere, two things are worth knowing. Eddie can export one edit's color grade as 33-point .cube LUT files for an editing app: a master LUT with the grade's color, and one LUT for each source that has its own grade. Film grain, haze and split tone stay in Eddie's player and MP4 renders. The LUTs are for Rec.709 footage after the camera conversion, and you cannot edit the grade inside them. The first request shows the price and charges nothing; the confirmed export costs 100 credits.
A timeline export carries Eddie's grade only for some edits, in Final Cut Pro (FCPXML) and Premiere XML, and never in the Premiere project file (.prproj). See color grading in Eddie for the details, and the Premiere Pro workflow for what Eddie hands over to Premiere.
What it will not do
- You cannot bring the Lumetri Color panel back in 27.0. Adobe retired it. The effect stays, edited in the Properties or Effect Controls panel.
- Clip Match is gone. Adobe documents no automatic replacement. Use Comparison View in Color Mode to match by eye and by scopes.
- Side-by-Side comparison is not available yet. Adobe says it is coming in a future release.
- Sequence operations are not available yet. Adobe's Color Controls page lists them as "not available yet". Grade clip by clip or with Custom Groups for now.
- Masks attach to clip operations only. You cannot mask a Group or Sequence operation in Color Mode.
FAQ
Did Adobe remove Lumetri Color from Premiere Pro?
Adobe removed the Lumetri Color panel in Premiere 27.0. The Lumetri Color effect is still in the Effects panel's Color Correction bin, and you edit it in the Properties or Effect Controls panel. Adobe's FAQ says the effect "will continue to be supported for years."
Why did Adobe remove the Lumetri Color panel?
Adobe replaced it with Color Mode, a separate grading workspace with a Clip Grid, heads-up displays on every control and grade management across clips and groups. Adobe also says Color Mode keeps out-of-range color values that the Lumetri effect may clip, handles color spaces more precisely, and is built for both SDR and HDR.
Will my old projects with Lumetri look different in Premiere 27.0?
No, according to Adobe. Existing Lumetri effects open with every adjustment intact, and old projects "appear as before, with total color fidelity."
Where is Color Mode in Premiere?
Select the Color tab in the header bar at the top left of the app, next to Edit. Open a sequence in Edit mode first.
Premiere Color Mode is not showing after the update. Why?
Check that you installed 27.0 and not the 26.5.3 bug-fix release, which also came out in November 2026. Also check that your computer meets 27.0's GPU memory minimum. Below it, Premiere 27.0 will not launch.
How do I apply a LUT in Premiere 27.0?
For log or raw footage, set the conversion in the Color Management panel. For a look, Adobe says transform LUTs and creative LUTs are fully supported in Color Mode through its LUT operations. You can still apply a Lumetri Color effect from the Effects panel and edit it in Properties.
Can I use Lumetri Color and Color Mode together?
Yes, but Adobe advises against it on new projects. Lumetri Color effects alongside Color Mode can limit your grading options in the Color workspace.
Sources
- Adobe, Adobe Premiere desktop release notes (updated November 18, 2026): November 2026 (version 27.0) and November 2026 (version 26.5.3). Checked 2026-11-21.
- Adobe, Changes to Lumetri Color (updated November 10, 2026). Checked 2026-11-21.
- Adobe, Color Mode in Premiere (updated November 10, 2026). Checked 2026-11-21.
- Adobe, Open a sequence in Color Mode and Color adjustment in Edit mode (updated November 10, 2026). Checked 2026-11-21.
- Adobe, Color Controls panel overview, Grading clips using Adjust and Available Style modules (updated November 10, 2026). Checked 2026-11-21.
- Adobe, Working with Video Scopes, About Comparison View and Isolated adjustments using masks (updated November 10, 2026). Checked 2026-11-21.
- Adobe, Premiere Color Mode, FAQ section. Checked 2026-11-21.
- Adobe, Add Look-up Tables (updated January 7, 2026), still describing the retired panel. Checked 2026-11-21.


